Raymond Masterson Mechanical Services Ltd were requested to carry out an upsizing of the Process Side of an existing ALFA LAVEL Plate Heat Exchange.
The project entailed upgrading the existing Process outlets from 1 1/2 ” ASME BPE to 2 1/2” ASME BPE and the ASME BPE field pipework from it.
RMMS Ltd machined 2 1/2” Weld/Clamp ferrules to the correct OD of the outlet tube of the Plate Heat Exchanger, RA Tested the machine parts to check the surface finish was below 0.5 RA.
Raymond Masterson Mechanical Services Ltd GTAW Orbital Welded the Weld/Clamp ferrule to the outlet points S1 and S2 on the process side of the Plate Heat Exchange.
Leave a Reply