Raymond Masterson Mechanical Services Ltd carried out a tie in to an existing 6” Steam Header and 6” RO Water Header during a Shut Down for one our pharmaceutical Clients. The tees were pre-fabricated in our workshop and were installed during a one day shutdown. Raymond Masterson Mechanical Services LTD are certified to carry out the TIG welding of pipework…
Raymond Masterson Mechanical Services Ltd carried out the upgrading of an Internal SS316L SF-1 ASME/BPE Pipework on a Fill machine in a live production area as requested by one of our Pharmaceutical clients. The works that Raymond Masterson Mechanical Services Ltd provided during this project included the following: · Supply, Fabrication and installation of Upgraded Pipework Valves and Instrumentation ·…
Raymond Masterson Mechanical Services Ltd carried out GTAW Orbital Weld of 4 x 6” SS316L SF1 ASME/BPE Reducer Fittings as requested by one of our clients. The client was not equipped with the necessary equipment to weld above 4” and asked Raymond Masterson Mechanical Services Ltd to carry out the weld. The works that Raymond Masterson Mechanical Services Ltd provided…
Raymond Masterson Mechanical Services Ltd carried out a 2-part Degreasing and Passivation on a new product line for one of our Pharmaceutical Clients. -Part 1 involved the De-Greasing & Passivation on a new product line in situ on site -Part 2 consisted of the De-greasing and Passivation of assorted parts submerged in the passivation bath that included the following: •…
Raymond Masterson Mechanical Services Ltd were requested from one of our clients to supply and fabricate an 1 ½” x 1” instrumentation tee spool to fit exact dimension provided by the client to replace an existing 1” Spool with the same instruments been used.. Raymond Masterson Mechanical Services Ltd cut, faced and GTAW Orbital welded the fittings and tube using…
Raymond Masterson Mechanical Services Ltd were requested from one of our clients to remove and relocate an existing Gemu T Valve on an existing High Purity SF1 Spool. The project was programmed to be carried out during a shutdown so that production would not be impacted. The dimensions of the spool required to be the same dimension as prior to…
Raymond Masterson Mechanical Services Ltd utilise Autodesk Inventor Software to create conceptual designs for our clients approval. Raymond Masterson Mechanical Services Ltd was requested to issue a drawing for an Alfa Laval Sani Micro Ultrapure Rotary Spray ball-Fabrication. On drawing approval, Raymond Masterson Mechanical Services Ltd supplied and fabricated 4 no ¾” SS316L ASMEBPE Spray balls for one of Pharmaceutical…
Raymond Masterson Mechanical Services Ltd fabricated ASME BPE SF1 and SF-4 Electropolished Parts as requested by clients to their exact specifications & requirements. We sourced specific tube, fittings and Diaphragm Valves through our approved suppliers. All spool pieces are fabricated in our workshop, 100% NDT visually inspected and recorded, Pressure Tested, Degreased and Passivated with a complete documentation package attached.…
Raymond Masterson Mechanical Services Ltd carried out a 2-part Degreasing and Passivation on a new product line for one of our Pharmaceutical Clients. -Part 1 involved the De-Greasing & Passivation on a new product line in situ on site -Part 2 consisted of the De-greasing and Passivation of assorted parts submerged in the passivation bath that included the following: •…
TRI CLAMP FERRULES ON A 6” SS316L SF-1 ASMEBPE HOT AND COLD DW HEADER As part of Raymond Masterson Mechanical Services Ltd Shutdown works, we carried out the installation of Tri Clamp Ferrules for future expansion on a 6” SS316L SF-1 ASMEBPE Hot and Cold DW Header for one our pharmaceutical clients. There was a limited time-frame to complete the…
