By
rmmsadmin
0
comment

RAYMOND MASTERSON MECHANICAL SERVICES LTD FABRICATION WORKSHOP

Raymond Masterson Mechanical Services Ltd has a Stainless Steel Fabrication Workshop based in Ballina, Co. Mayo where we carry out a large range of custom builds and installs. Our workshop is equip with the latest technologies available to the industry. We provide pipe fitting services that include a range of pipe sizes from 1/4″ up to and including 6″. We…



By
rmmsadmin
0
comment

UPSIZING OF AN EXISTING ALFA LAVEL PLATE HEAT EXCHANGE

Raymond Masterson Mechanical Services Ltd were requested to carry out an upsizing of the Process Side of an existing ALFA LAVEL Plate Heat Exchange. The project entailed upgrading the existing Process outlets from 1 1/2 '' ASME BPE to 2 1/2'' ASME BPE and the ASME BPE field pipework from it. RMMS Ltd machined 2 1/2'' Weld/Clamp ferrules to the…



By
rmmsadmin
0
comment

UPGRADE OF INTERNAL PIPEWORK AND FILL MACHINE

Raymond Masterson Mechanical Services Ltd carried out the upgrading of an Internal SS316L SF-1 ASME/BPE Pipework on a Fill machine in a live production area as requested by one of our Pharmaceutical clients. The works that Raymond Masterson Mechanical Services Ltd provided during this project included the following: · Supply, Fabrication and installation of Upgraded Pipework Valves and Instrumentation ·…



By
rmmsadmin
0
comment

RAYMOND MASTERSON MECHANICAL SERVICES LTD – SS316L SPRAYBALLS

Raymond Masterson Mechanical Services Ltd manufactured a pair of SS316L Sprayballs. The Tri Clamp Weld End machine part was fabricated on a lathe where it was polished to a 0.3 RA Surface Finish and checked on a RA Tester to produce the RA Test Report. The WeldEnd of the machined ferrule adaptor was machined to the exact dimensions of the…



By
rmmsadmin
0
comment

TRI CLAMP FERRULES ON A 6” SS316L SF-1 ASMEBPE HOT AND COLD DW HEADER

As part of Raymond Masterson Mechanical Services Ltd Shutdown works, we carried out the installation of Tri Clamp Ferrules for future expansion on a 6” SS316L SF-1 ASMEBPE Hot and Cold DW Header for one our pharmaceutical clients. There was a limited time-frame to complete the project that included cutting into the existing header. As part of this shutdown project…



By
rmmsadmin
0
comment

CERTIFIED TIG WELDING OF PIPEWORK INSTALLATIONS

Raymond Masterson Mechanical Services LTD are certified to carry out the TIG welding of pipework installations. Raymond Masterson Mechanical Services Ltd have been awarded the ASME IX and EN ISO-15614 standard WPQR for both Stainless Steel 316L and Carbon Steel Pipe from 1.94mm 12.04mm Wall thickness in all positions. Raymond Masterson Mechanical Services Ltd Personal are certified prior to any…



By
rmmsadmin
0
comment

ASME BPE SF1 AND SF-4 ELECTROPOLISHED PARTS

Raymond Masterson Mechanical Services Ltd fabricated ASME BPE SF1 and SF-4 Electropolished Parts as requested by clients to their exact specifications & requirements. We sourced specific tube, fittings and Diaphragm Valves through our approved suppliers. All spool pieces are fabricated in our workshop, 100% NDT visually inspected and recorded, Pressure Tested, Degreased and Passivated with a complete documentation package attached.…



By
rmmsadmin
0
comment

6″ CLEAN STEAM HIGH PURITY HEADER

Raymond Masterson Mechanical Services Ltd fabricated a 6” Stainless Steel SF-4 Ferrite Clean Steam Header in their workshop for one of their Pharmaceutical Clients and was installed on site during a 24 hour Shutdown Window. The services that Raymond Masterson Mechanical Services Ltd provided during this particular project included the following: • N.D.T Visual Inspection • GTAW Orbital Welding •…



By
rmmsadmin
0
comment

CARBON TIG FABRICATIONS & WELDING

Raymond Masterson Mechanical Services Ltd are certified to carry out the TIG welding of pipework installations. RMMS Ltd have been awarded the ASME IX and EN ISO-15614 standard WPQR for both Stainless Steel 316L and Carbon Steel Pipe from 1.94mm 12.04mm Wall thickness in all positions. Raymond Masterson Mechanical Services Personnel are certified prior to any project commencement to the…



By
rmmsadmin
0
comment

PREFABRICATED STAINLESS STEEL 316L SF4 ELECTRO POLISHED 3/4″ SPOOLS

Raymond Masterson Mechanical Services Ltd recently fabricated SS 316L SF4 electro polished 3/4" spools as requested by one our pharmaceutical clients. Prefabrication of the spools allows us to reduce our time on site meaning our clients have less production downtime. All spool pieces are fabricated in our workshops, visual inspected and 100% Borescoped & recorded, Pressure Tested, Degreased and Passivated with a complete documentation package attached. You can check out all…

1 2 3 4